#
# Sample configuration file for ISC dhcpd
#
# Make changes to this file and copy it to /etc/dhcpd.conf
#

ddns-update-style            none;

default-lease-time           21600;
max-lease-time               21600;

option subnet-mask           255.255.255.0;
option broadcast-address     192.168.0.255;
option routers               192.168.0.3;
option domain-name-servers   192.168.0.3;
option domain-name           "ltsp";          # <--Fix this domain name

option root-path             "192.168.0.3:/opt/ltsp/i386";

option option-128 code 128 = string;
option option-129 code 129 = text;

subnet 192.168.0.0 netmask 255.255.255.0 {
    use-host-decl-names      on;
    option log-servers       192.168.0.3;


##
## If you want to use static IP address for your workstations, then un-comment
## the following section and modify to suit your network.
## Then, duplicate this section for each workstation that needs a static
## IP address.
##
##    host ws001 {                                       <----- Fix this hostname
##        hardware ethernet    00:11:22:33:44:55;           <-- Fix this MAC addr
##        fixed-address        192.168.0.1;                 <-- Fix this IP addr
##        filename             "/lts/vmlinuz-2.4.26-ltsp-1";
##    }

##
## If you want to use a dynamic pool of addresses, then un-comment the following
## lines and modify to match your network.
##
##    subnet  192.168.0.0 netmask 255.255.255.0 {
##        range dynamic-bootp 192.168.0.1 192.168.0.253;
##    }
##

}

#
# If you need to pass parameters on the kernel command line, you can
# do it with option-129.  In order for Etherboot to look at option-129,
# you MUST have option-128 set to a specific value.  The value is a
# special Etherboot signature of 'e4:45:74:68:00:00'.
#
# Add these two lines to the host entry that needs kernel parameters
#
#        option option-128     e4:45:74:68:00:00;       # NOT a mac address
#        option option-129     "NIC=ne IO=0x300";
#
